Rockler Dovetail Jig:
Cutting beautiful through and half-blind dovetails is fast and easy with our new and improved dovetail jig! Rockler's exclusive one-piece stop gives you the perfect offset every time for dead-on dovetailing accuracy. And our new preset template guide allows for quick initial setup for 1/2" to 3/4" thick stock. Jig will cut half-blind dovetailed joints from 1/2" to 1-1/8" thick and full through dovetails from 3/8" to 3/4" thick. Accommodates stock up to 11" wide. Requires router with 1/2" collet.
8mm diameter bits are 25% larger than typical 1/4" bits, reduce chatter and fit all existing Rockler dovetail jigs
Preset template and fence locations clearly marked for standard thickness stock
Clamping bars include abrasive surface to grip stock and prevent slipping
Depth gauge on template for setting dovetail bit height for half-blind joints
Rockler Dovetail Jig Dust Collector:
You don't have to spend hundreds of dollars to get dust collection with a dovetail jig. Our revolutionary new dust collector eliminates virtually all the dust created when cutting dovetails. It easily attaches to Rockler's Dovetail Jig and a shop vacuum or dust collection system to provide you with a clean cutting area and safe working conditions.
Easily attaches to Rockler's dovetail jigs
Built-in 2-1/4" port fits most shop vac hoses (not included)
Sliding baffle directs the dust collection to where the dovetails are being cut
Sweep brush adjusts to provide a complete seal for stock thicknesses of 1/2" up to 1-1/8"
Contains the dust while allowing the bit to travel through without damage
Two extra long 4" knob posts make adding your dust collector shroud easy
(1) Dovetail Jig
(1) Dovetail Jig Dust Collector
(2) Phenolic Templates
(1) 1/2'' x 14° x 8mm Shank, Carbide-Tipped Router Bit
(1) 1/2'' x 8° x 8mm Shank, Carbide-Tipped Router Bit
(1) 5/16'' x 8mm Shank, Straight Carbide-Tipped Router Bit
Get all the great features of the aluminum Sure-Foot® Pipe Clamp in a size that matches your project! This Rockler-exclusive design is available in 24", 36", 48", and 60" lengths.
Extra wide 2-1/2" foot for exceptional stability
Higher base that raises the bar 1-1/2" above the table for excellent handle clearance
Built-in clamp hook locks onto a 3/4" board eliminating the need to "clamp the clamp" when hanging on a wall
Expanding dust hose with flexible, universal port system connects to nearly any handheld power tool!
Handheld power tools generate a lot of dust right where you least want it: directly under your nose. Unfortunately, the confusing array of non-standardized small ports on handheld tools makes it hard to connect a dust hose—until now. This new kit from Rockler includes two sizes of flexible rubber dust ports—1'', 1-1/2''—that flex to fit on almost any tool, plus a 2-1/4'' port that connects to most shop vacuums, dust separators or our optional Cord and Hose Holder (47321). The two tool-end ports are thoughtfully designed with a slight elbow that helps lift the dust hose off of your work. All ports thread securely into the included premium stretch hose, which is a remarkable engineering feat in itself. This supple, agile hose expands from a mere 3' to nearly 15' long, and is a pleasure to work with, providing almost zero resistance as you move about your workspace.
Winner of WOOD Magazine's Innov8 Award for 2015
Ports flex to fit almost any handheld power tool with dust collection compatibility
Hose expands 5x the original length—from 3' to 15'— for a large working radius
Durable, flexible rubber hose is easy to manuever and manipulate, is kink- and crush-resistant, and has no memory
Ports swivel for free range of motion
Ports reverse thread into hose for a secure, leak-free connection
To use the FlexiPort system for cleanup tasks, pair it with our Shop Vacuum Accessory Kit (#52125, sold separately). The accessories fit right into the larger 1-1/2'' flexible port
Note: The two FlexiPort hose systems—12' Fixed-Length and 3' to 12' Expandable—are NOT cross compatible. FlexiPorts with the black threads fit the Expandable Hose only, and FlexiPorts with the gray collar fit the 12' Fixed-Length Hose only.
Sawstop, woodcraft, toolnut, and Rockler are running a big promotion on the SawStop 10" jobsite saw with mobile cart for $999.99 + tax and $100 flat rate shipping. Regular price is $1299 and I rarely see a discount on Sawstop saw. Other Sawstop dealers, like HomeDepot/CPO Outlet/WoodWorkers have not followed up this price yet.